1.SETTING ITEMS (USER)
Setting General Functions 15
1 SETTING ITEMS (USER)
2
Press [GENERAL] in the USER menu.
The GENERAL menu is displayed.
To display the USER menu, see the following page:
P.8 “Entering User Menu”
3
Press [CALIBRATION].
The CALIBRATION menu is displayed.
4
Refer to Step 1 in the following operations.
To perform the copy calibration, see the following page:
P.90 “Setting the copy calibration”
To perform the print calibration, see the following page:
P.91 “Setting the print calibration”
Instructions on how to perform the copy and print calibrations are the same when they are performed in the
ADMIN menu.
To Next Page
Loading...
