Toshiba e-STUDIO400P - MANAGING PRINT JOBS FROM THE CONTROL PANEL

3.MANAGING COUNTERS (COUNTER MENU)
Managing Department Codes 177
3 MANAGING COUNTERS (COUNTER MENU)
4
Enter the administrator password and press [OK].
The DEPT. MANAGEMENT menu is displayed.
If the administrator password has not been changed before, enter the default administrator password “123456”.
If you enter incorrect passwords three times in a row, the equipment cannot be operated for 30 seconds.
5
Continue the operation that you require.
 P.178 “Printing department code list”
 P.179 “Enabling department codes”
 P.180 “Resetting all department counters”
 P.181 “Deleting all department codes”
 P.182 “Registering a new department code”
 P.185 “Editing department codes”
 P.188 “Deleting department codes”
 P.189 “Resetting the counter for each department”
 P.190 “Setting output limitations for all departments”
 P.192 “Setting the no limit black function”
y Menus other than “DEPARTMENT MANAGEMENT” and “DEPARTMENT REGISTRATION” will be
available after you register a department code and enable the department management feature.
y [NO LIMIT BLACK] is available only for the e-STUDIO6530C Series and e-STUDIO4520C Series.