3 MANAGING COUNTERS (COUNTER MENU)
184 Managing Department Codes
5
Set the limitation of this department code as required and press [OK] to register the
new department code.
For e-STUDIO6530C Series, e-STUDIO4520C Series
For e-STUDIO455 Series, e-STUDIO855 Series
COLOR — Press [ON] to enable color output limitation for this department code. When you select [ON], enter the
maximum number of the color outputs for this department code in the [Limitation] box using the digital keys. You
can enter up to “99999999”. If not setting an output limitation for color outputs, press [OFF].
BLACK — Press [ON] to enable black output limitation for this department code. When you select [ON], enter the
maximum number of black outputs for this department code in the [Limitation] box using the digital keys. You can
enter up to “9999999”. If not setting an output limitation for black outputs, press [OFF].
y [COLOR] is available only for the e-STUDIO6530C Series and e-STUDIO4520C Series.
y If you enter “0” for the limitation, it will disable printing any copies or prints using this department code.
y When the number of outputs exceeds the limitation during the job being printed, a few copies that exceed
the limitation are printed and counted because the equipment cannot stop the job immediately.
y For the e-STUDIO6530C Series and e-STUDIO4520C Series, you cannot set the limitation for black when
the No Limit Black function is enabled.
To Next Page
Loading...
