2.SETTING ITEMS (ADMIN)
Setting General Functions 89
2 SETTING ITEMS (ADMIN)
2
Press [GENERAL] in the Admin menu.
The GENERAL menu is displayed.
To display the ADMIN menu, see the following page:
P.69 “Entering Admin Menu”
3
Press [CALIBRATION].
The CALIBRATION menu is displayed.
4
Continue the operation that you require.
P.90 “Setting the copy calibration”
P.91 “Setting the print calibration”
For the e-STUDIO6530C Series, [600dpi PRINT] and [1200dpi PRINT] are provided instead of [PRINT].
To Next Page
Loading...
