Toshiba E-STUDIO520 - Disassembly and Replacement

e-STUDIO520/600/720/850 LASER OPTICAL UNIT March 2005 © TOSHIBA TEC
8 - 12
8.6 Disassembly and Replacement
[A] Laser unit cooling fan
(1) Take off the top right cover, right upper cover,
right center cover and right rear cover.
( P.2-44 "[C] Top right cover",
P.2-45 "[F] Right upper cover",
P.2-45 "[G] Right center cover",
P.2-45 "[H] Right rear cover")
(2) Remove 1 screw, loosen 9 screws and take
off the plate cover.
Fig.8-12
(3) Remove 1 screw fixing the Laser unit.
(Not reguired for e-STUDIO850)
(4) Remove 2 screws and take off the laser unit
fixing stay.
Fig.8-13
(5) Disconnect 1 connector and remove 2
screws to take off the laser unit cooling fan.
Fig.8-14
Plate cover
Laser unit fixing stay
Laser unit cooling fan