10
March 2005 © TOSHIBA TEC e-STUDIO520/600/720/850 PROCESS RELATED SECTION
10 - 9
10.7 Disassembly and Replacement
[A] Main charger
(1) Take off the toner cartridge drive unit.
( P.12-15 "[A] Toner cartridge drive unit")
(2) Remove 3 screws and take off the left inner
cover.
(3) Remove 1 stepped screw and pull out the
main charger.
Fig.10-6
(4) Press the button to release the tension of the
main charger grid, and then release the hook
to remove the grid.
Fig.10-7
(5) Take off 1 finger and then the front terminal
cover.
Fig.10-8
Main charger
Screw
Main charger grid
Button
Terminal cover
Latch
To Next Page
Loading...
