Toshiba E-STUDIO520 - Disassembly and Replacement

16
March 2005 © TOSHIBA TEC e-STUDIO520/600/720/850 REVERSING AUTOMATIC DOCUMENT FEEDER (RADF)
16 - 85
16.13 Disassembly and Replacement
[A] Reversing Automatic Document Feeder (RADF) unit
[B] Cover
[B-1] ADF front cover
(1) Take off the rear cover
( P.2-47 "[L] Rear cover").
(2) Disconnect 1 connector.
Fig.16-107
(3) Remove 2 screws. Then take off the RADF
unit by sliding it to the rear side and lifting it
up while the unit is opened.
Fig.16-108
(1) Open the jam access cover. Then remove 3
screws to take off the ADF front cover.
Fig.16-109
Connector
Screw
Screw
ADF front cover
Screw
Screw