Toshiba E-STUDIO520 - Driving

9
March 2005 © TOSHIBA TEC e-STUDIO520/600/720/850 PAPER FEEDING SYSTEM
9 - 9
9.3.4 Driving
The drive of each motor in the paper feeding area activates the paper transfer roller as follows.
Feeding motor
(M20)
Timing belt
Gear, Pulley
Transport motor
(M17)
Timing belt
Pulley
Intermediate transport roller
Registration motor
(M16)
Timing belt
Pulley
Registration roller
Tray-up motor-1
(M21)
Tray in the first and second drawer
Tray-up motor-2
(M22) (* For NAD, SAD and TWD (e-STUDIO600/720))
Tray in the third and fourth drawer
Tandem LCF Tray-up motor
(M41) (* Except for NAD, SAD and TWD (e-STUDIO600/720))
Tray of the Tandem LCF
Tandem LCF end fence motor
(M42) (* Except for NAD, SAD and TWD (e-STUDIO600/720))
Gear, Timing belt End fence
Gear
Gear Drawer transport clutch
(CLT5, 7, 9, 11)
[Feeding area of the drawer or tandem LCF]
Drawer feed clutch
(CLT6, 8, 10, 12)
[Bypass feeding area]
Drawer pickup roller
Drawer feed roller
Drawer separation roller
Bypass feed clutch
(CLT4)
Bypass pickup roller
Bypass Transport roller
Bypass separation roller
Transport roller