9
March 2005 © TOSHIBA TEC e-STUDIO520/600/720/850 PAPER FEEDING SYSTEM
9 - 11
• The leading edge of paper turns ON the transport sensor (S33, 39, 45, 51), the feed clutch (CLT6, 8)
is turned OFF and the transport clutch (CLT5, 7) is turned ON.
• The leading edge of paper turns ON the registration sensor (S18) and paper is aligned with the reg-
istration roller.
• The transport clutch (CLT5, 7) is turned OFF and the transport roller is stopped.
• The registration motor (M16) and transport clutch (CLT5, 7) are turned ON and paper is transported
to the transfer unit.
To Next Page
Loading...
