9
March 2005 © TOSHIBA TEC e-STUDIO520/600/720/850 PAPER FEEDING SYSTEM
9 - 21
[A-1] Pickup roller, Feed roller and Separation roller
(6) Disconnect 1 connector and remove 3
screws to take off the paper feeder unit.
Note:
There are 4 identical paper feeder units
(when the LCF is installed, there are 2).
Fig.9-15
(1) Remove 1 clip to take off the pickup roller.
Fig.9-16
(2) Remove 2 screws to take off the guide.
Fig.9-17
Paper feeder unit
Pickup roller
Guide
To Next Page
Loading...
