Toshiba E-STUDIO520 - Page 276

e-STUDIO520/600/720/850 DEVELOPER UNIT March 2005 © TOSHIBA TEC
12 - 30
[P] Used toner transport motor (M9)
(1) Take off the rear cover
( P.2-47 "[L] Rear cover")
(2) Take off the left rear cover
( P.2-46 "[K] Left rear cover")
(3) Disconnect 1 connector and remove 2
screws to take off the used toner transport
motor.
Fig.12-54
Used toner transport motor