Toshiba E-STUDIO520 - Page 66

e-STUDIO520/600/720/850 OUTLINE OF THE MACHINE March 2005 © TOSHIBA TEC
2 - 44
[C] Top right cover
[D] Top left cover
[E] Top rear cover
(1) Remove 1 screw and open the RADF.
(2) Slide the cover to the rear side to release the
hook, and then take off the top right cover.
Fig.2-36
(1) Remove 1 screw and open the RADF.
(2) Slide the cover to the rear side to release the
hook, and then take off the top left cover.
Fig.2-37
(1) Take off the RADF
( P.16-85 "[A] Reversing Automatic Docu-
ment Feeder (RADF) unit").
(2) Take off the top right cover
( P.2-44 "[C] Top right cover").
(3) Take off the top left cover
( P.2-44 "[D] Top left cover").
(4) Remove 2 screws to take off the top rear
cover.
Fig.2-38
Top right cover
Top left cover
Top rear cover