Toshiba e-studio905 - 8021 X

8021x
Use the "8021x" command to display IEEE 802.1x related information.
View settings
msh> 8021x
Configuration
msh> 8021x eap {tls|ttls|leap|peap} {chap|mschap|mschapv2|pap|md5|tls}
• You can specify the EAP authentication type.
• tls: EAP-TLS (default)
• ttls: EAP-TTLS
• leap: LEAP
• peap: PEAP
• chap, mschap, mschapv2, pap, md5, or tls are settings for the phase 2 method, and must be
set when using EAP-TTLS or PEAP.
• Do not make these settings when using other EAP authentication types.
• If you select EAP-TTLS, you can select chap, mschap, mschapv2, pap, or md5.
• If you select PEAP, you can select mschapv2 or tls.
msh> 8021x username "character string"
• You can specify the login user name for the Radius server.
• Usable characters: ASCII 0x20-0x7e (31 bytes).
• The default is blank.
msh> 8021x username2 "character string"
• You can specify the phase 2 username for EAP-TTLS/PEAP phase 2 authentication.
• Usable characters: ASCII 0x20-0x7e (31 bytes).
• The default is blank.
msh> 8021x domain name "character string"
• You can specify the login domain name for the Radius server.
• The characters you can enter are ASCII 0x20-0x7e (31 bytes), but not "@" or "\".
• The default is blank.
msh> 8021x password "character string"
• You can specify the login for the Radius server.
• Usable characters: ASCII 0x20-0x7e (128 bytes). The default is blank.
msh> 8021x srvcert {on|off}
• You can set the server certificate. The default is "off".
5. Monitoring and Configuring the Printer
176
5