Administrator Tools
How the defaults in the Administrator Tools of copying of the main and sub-machines are used in connect
copy will be explained.
Only the functions described in this section affect the Connect Copy function.
User Authentication Management
• The main machine follows the values that are set in it. The set values of the sub-machines do not
affect the connect copy.
Administrator Authentication Management
• The main machine follows the values that are set in it. The set values of the sub-machines do not
affect the connect copy.
Program / Change Administrator
• The main machine follows the values that are set in it. The sub-machines follows the settings made
on the main machine, regardless of the settings made in it.
External Charge Unit Management
• The main machine follows the values that are set in it. The sub-machines follows the settings made
on the main machine, regardless of the settings made in it.
Enhanced External Charge Unit Management
• The main machine follows the values that are set in it. The sub-machines follows the settings made
on the main machine, regardless of the settings made in it.
AOF (Always On)
• The set values of the main and sub-machines do not affect the connect copy.
• During connect copy, neither the main machine nor the sub-machines is automatically switched
off. Once the connect copy is cleared, the power is cut off as the time period set in "Auto-Off
Time Setting" elapses in accordance with the setting of AOF.
System Settings on Main and Sub-machines
63
To Next Page
Loading...
