Toshiba e-studio905 - Sntp

• Specify "on" to enable, and "off" to disable.
SNMP TRAP configuration
msh> snmp trap{v1|v2|v3} {on|off}
• Specify "on" to enable, and "off" to disable.
Remote Configuration Authorization configuration
msh> snmp remote {on|off}
• Specify "on" to enable, and "off" to disable the SNMP v1v2 setting.
SNMP v3 TRAP configuration display
msh> snmp v3trap
msh> snmp v3trap [1-5]
• If a number from 1 to 5 is entered, settings are displayed for that number only.
Configuring a sending address for SNMP v3 TRAP
msh> snmp v3trap [1-5] {ipv4|ipv6|ipx} "address"
Configuring a sending protocol for SNMP v3 TRAP
msh> snmp v3trap [1-5] active {ipv4|ipv6|ipx} {on|off}
Configuring an user account for SNMP v3 TRAP
msh> snmp v3trap [1-5] account "account_name"
• Enter an account name using up to 32 alphanumeric characters.
Deleting a SNMP v3 TRAP user account
msh> snmp v3trap [1-5] clear account
Configuring a SNMP v3 encryption algorithm
msh> snmp v3auth {md5|sha1}
Configuring SNMP v3 encryption
msh> snmp v3priv {auto|on}
• Set "auto" for automatic encryption configuration.
• If you select "on", plain-text communication becomes impossible - only encrypted communication
is possible.
• "Encrypted communication" means an encrypted password is set on the machine.
sntp
The printer clock can be synchronized with a NTP server clock using Simple Network Time Protocol (SNTP).
Use the "sntp" command to change SNTP settings.
5. Monitoring and Configuring the Printer
202
5