Toshiba e-studio905 - Changing an User Code

10. Select the functions to be used with the user code from "Available Functions".
11. Press [OK].
12. Press [Exit].
13. Press the [User Tools] key.
• You can enter a one-to eight-digit user code.
• To register the name, see "Registering Names".
• p.254 "Registering Names"
Changing an User Code
This section describes how to change a user code.
• Even if you change a user code, the counter value will not be cleared.
1. Press the [User Tools] key.
2. Press [System Settings].
6. Registering Addresses and Users for Scanner Functions
260
6