• When [Do not Specify] is selected for LDAP Authentication, the User Name and Password that you
have specified in Program / Change LDAP Server of Administrator Tools settings applies. For details,
see "Programming the LDAP server".
1. Press the [User Tools] key.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [Address Book Management].
5. Check that [Program / Change] is selected.
6. Press the name you want to register or enter the registered number using the number keys.
You can search by the registered name, folder name, and e-mail address.
7. Press [Auth. Info], and then press [ Next].
8. Press [Specify Other Auth. Info] right "LDAP Authentication".
9. Press [Change] right "Login User Name".
10. Enter the login user name, and then press [OK].
11. Press [Change] right "Login Password".
12. Enter the password, and then press [OK].
13. Enter the password again to confirm, and then press [OK].
Registering SMTP and LDAP Authentication
303
To Next Page
Loading...
