Toshiba e-studio905 - Page 353

• Step: 0.2 mm
The default setting is "0" mm.
• B5 JIS
• Max.: 4.0 mm
• Min.: -4.0 mm
• Step: 0.2 mm
The default setting is "0" mm.
• Other Paper Sizes
• Max.: 4.0 mm
• Min.: -4.0 mm
• Step: 0.2 mm
The default setting is "0" mm.
0512: Adjust Gate Fold Position 3
Adjust the fold position (S3) of segment 3 of gate fold sheets when using the optional Multi-Folding
Unit.
The upper right illustration shows a partly opened, double parallel-folded sheet (folded in half), and
the lower right illustration shows a fully folded sheet. The mark indicates the leading edge (relative
to the paper feed direction), and the mark indicates the trailing edge.
BRU049D
• A3
• Max.: 4.0 mm
• Min.: -4.0 mm
• Step: 0.2 mm
The default setting is "0" mm.
• B4 JIS
• Max.: 4.0 mm
• Min.: -4.0 mm
Adjustment Settings for Operators
351
8