Toshiba e-studio905 - Page 36

SMB Computer Name
Specify the SMB computer name.
Enter the computer name using up to 15 characters.
"*+,/:;<>=?[\]|. and spaces cannot be entered.
Do not set a computer name starting with RNP and rnp.
Use uppercase letters for alphabets.
SMB Work Group
Specify the SMB work group.
Enter the computer name using up to 15 characters.
"*+,/:;<>=?[\]|. and spaces cannot be entered.
Use uppercase letters for alphabet.
Ethernet Speed
Set the access speed for networks.
The default setting is [Auto Select].
Select a speed that matches your network environment. [Auto Select] should usually be selected.
10Mbps Half
Duplex
10Mbps Half
Duplex
Machine Setting
*Terms will vary depending on the network.
Connection
10Mbps Full
Duplex
10Mbps Full
Duplex
100Mbps Half
Duplex
100Mbps Half
Duplex
100Mbps Full
Duplex
100Mbps Full
Duplex
Auto Select*
Auto Select
BZU022
IEEE 802.1X Authentication for Ethernet
Specify the IEEE 802.1X authentication for Ethernet.
The default setting is [Inactive].
For details about IEEE 802.1X authentication, see "Configuring IEEE 802.1X".
1. System Settings
34
1