70 GX9 ASD Installation and Operation Manual
RS232/RS485
To use the EOI for control requires that the EOI Port Address be set to RS232/RS485 to use this
feature.
Communication Card
Routes the control and monitoring I/O to CNU3 of the Control Board of the GX9 ASD (Option
Card connector).
UP/DOWN Frequency
Discrete input terminals may be configured to increase or decrease the speed of the motor by
momentarily connecting the assigned discrete input terminal to CC. See UP/DOWN Frequency
Disposition at Power Down on pg. 88 for further information on this feature.
Pulse Input Option
Configures the system to receive pulse input. See PG Reference Point 1 on pg. 122 for further
information on this feature.
To Next Page
Loading...
