Toshiba RBC-AWSU52-UL - For Group Connections; First Time Use

–10–
Installation Manual
EN
■ For group connections
• When configuring a group connection consisting of indoor units of 4-way air discharge type (including compact
type) and indoor units of other type (including air to air heat exchanger), set the 4-way ceiling cassette type
indoor unit as the header. Otherwise, the “Individual louver” and some other settings cannot be performed.
• When configuring a group connection consisting of indoor units with auto grille function and other types of indoor
unit, set an indoor unit with auto grille function as the header. Otherwise, the “Auto grille” cannot be performed.
■ First time use
When the unit is used for the first time, it takes a while for the remote controller to recognize operation input after
the power is turned on. This is not a malfunction.
▼ Turning on the power the first time after installation
It takes approximately 10 minutes until you can operate the remote controller.
▼ Turning on the power from the 2nd time onward
It takes approximately 3 minutes until you can operate the remote controller.
Power on “” blinks “” turns off Remote controller can be used
About
10 minutes
Power on “” blinks “” turns off Remote controller can be used
About
3 minutes