Toshiba RBC-AWSU52-UL - Selecting Ventilation Modes; Humidification Control; Accessing Ventilation Settings Menu

–16–
Installation Manual
EN
■5. Light & LED
Select whether to enable lighting of the operating LED and the backlight of the LCD.
■6. Sound
You can set the sound of button operations on the remote controller.
1 In the “Initial setting” screen, press [ ]
and [ ] to select “Light & LED”, and then
press [ Set/Fix]
2 Press [ ] and [ ] to select the item you
want to change
3 Press [ ] and [ ] to select “ON” or
“OFF”
4 Press [ Set/Fix]
 Return to the “Initial setting” screen.
NOTE
They are set to “ON” as the factory default setting.
1 In the “Initial setting” screen, press [ ]
and [ ] to select “Sound”, and then press
[Set/Fix]
2 Press [ ] and [ ] to select “ON” or
“OFF”
3 Press [ Set/Fix]
 Return to the “Initial setting” screen.
NOTE
• There are no sounds when doing operations on the
“Menu”.
• They are set to “ON” as the factory default setting.