Toshiba RBC-AWSU52-UL - Energy Saving Operations

–38–
Installation Manual
EN
■10.Reset Power Consumption data
Power consumption data saved in the remote controller can be reset.
■11.Notice history
Displays the last 10 notice codes, and at which unit and when they occurred.
NOTE
The notice history data shows a history of 10 occurrences. If the occurrences exceed 10, the oldest data is deleted.
Deleting notice history
REQUIREMENT
If you are using 2 remote controllers, delete the history at each remote controller.
1 Press [ ] and [ ] to select “Reset
Power Consumption data” on the “Field
setting menu” screen, then press [ Set/
Fix]
2 To reset the power consumption data, press
the [ Set/Fix]
Data is reset and the display returns to the
“Field setting menu” screen.
1 In the “Field setting menu” screen, press
[ ] and [ ] to select “Notice history”,
and then press [ Set/Fix]
1 Press [ Menu] while the “Notice history”
screen is displayed
 “Reset all notice data.” is displayed.
2 Press [ Set/Fix]