Toshiba RBC-AWSU52-UL - Name of Room; (Set the Name of the Location that the Remote Controller Is Installed)

–14–
Installation Manual
EN
■2. Name of room
(Set the name of the location that the remote controller is
installed)
You can set the name of the location that the remote controller is installed. (The air conditioner can be operated
even if this is not set.)
1 In the “Initial setting” screen, press [ ]
and [ ] to select “Name of room”, and
then press [ Set/Fix]
2 Set the name of the remote controller
You can input numbers and letters in screen (1).
 Press [ ], [ ], [ ], and [ ] to move the
black highlight to the desired character, and then
press [ Set/Fix] to display the character at the top
of the screen.
Up to 16 one-byte characters can be entered for “Name
of room”.
When you want to delete a character, select “Del”, and
then press [ Set/Fix] to delete a character.
When you want to fix the name of the remote controller,
select “Fix” and press [ Set/Fix] to fix the name of
the remote controller.
Name is displayed here.
(1)
(2)