Toshiba RBC-AWSU52-UL - Password Setting

–18–
Installation Manual
EN
■8. Password setting
You can set an administrator password for functions of the “Schedule timer” and “Night operation”.
You can select “ON” or “OFF” the administrator password and change the administrator password.
NOTE
• You can individually set “ON” or “OFF” for the passwords for “Schedule timer” and “Night operation”. You can also set
different numbers for a password.
• All of the initial passwords are “OFF” and set to “1111”.
1 In the “Initial setting” screen, press [ ]
and [ ] to select “Password setting”, and
then press [ Set/Fix]
2 Press [ ] and [ ] to select the functions
for which you want to set a password, and
then press [ Set/Fix]
 If the password is set to “OFF”, do the procedure
subsequent to step 4.
3 Input the current password by pressing
[ ] and [ ] to select numbers, and by
pressing [ ] and [ ] to select input
positions, and then press [ Set/Fix]
4 Press [ ] and [ ] to select the item you
want to set, and then press [ Set/Fix]
 To select “ON” or “OFF” the administrator password,
select “Password setting” and perform step
5.
 To change the administrator password, select
“Password change” and perform step
6.
5 Press [ ] and [ ] to select “ON” or
“OFF”, and the press [ Set/Fix]
 Return to the step 4.
6 Press [] or [] and [] or [] to
input the changed password, and then
press [ Set/Fix]
 Return to the step 4.