Toshiba RBC-AWSU52-UL - Individual Louver Adjustment

–20–
Installation Manual
EN
■10.Language (Changing the on-screen language)
Set the language to display on screen.
■11.Press & hold 4 sec.
(Settings that require the button to be held down for at least
4 seconds to operate)
This function prevents erroneous operations. You can select “ON” or “OFF” for the settings.
“ON”: You can do operations by holding down the [ ON/OFF] button for at least 4 seconds.
“OFF”: You can operate the [ ON/OFF] button as normal.
1 In the “Initial setting” screen, press [ ]
and [ ] to select “Language”, and then
press [ Set/Fix]
2 Press [ ] and [ ] to select your desired
language
3 Press [ Set/Fix]
1 In the “Initial setting” screen, press [ ]
and [ ] to select “Press & hold 4 sec.”,
and then press [ Set/Fix]
2 Press [ ] and [ ] to select “ON” or
“OFF”
3 Press [ Set/Fix]
 Return to the “Initial setting” screen.
NOTE
They are set to “OFF” as the factory default setting.