–29–
Installation Manual
■3. Alarm history
Displays the last 10 check codes, and at which unit and when they occurred.
• The check code history data shows a history of 10 occurrences. If the occurrences exceed 10, the oldest data is deleted.
• If the same check code occurs repeatedly, the date of the first occurrence is displayed.
Deleting check code history
If you are using 2 remote controllers, delete the history at each remote controller.
1 In the “Field setting menu” screen, press
[ ] and [ ] to select “Alarm history”,
and then press [ Set/Fix]
1 Press [ Menu] while the “Alarm history”
screen is displayed
“Reset all alarm data.” is displayed.
2 Press [ Set/Fix]
To Next Page
Loading...
