IPT2008-SDL Settings
Configurations
Strata CIX Telephones Administrator Manual 06/06 33
RRQ Port Number
1. Select Configuration > Advanced > RRQ Port.
The current RRQ Port Number displays
(shown right).
2. Enter the New number.
3. Press the SET soft key to accept the change
...or press the CANCEL soft key to cancel the
change and go to the Network Setting screen.
Note For other notes, refer to “Station ID” on
page 29.
Application Server Address
1. Select Configuration > Advanced > AP Addr.
The current Application Server Addr screen
displays (shown right).
Note The Application Server Address can be an
IP Address or a URL (alphanumeric). See
“Dial Pad Alphanumeric Characters” on
page 34 to enter the URL.
2. Follow the steps to change settings on page 27.
RRQ Port Number
0 :Current
:New
Backspace = Vol-Down.
[SET] [CANCEL]
CONFIG
To Next Page
Loading...
Need help?
General