– 5 –
Maintenance and Inspection
To use the robot safety, strictly observe the following matters.
• NEVER burn, disassemble or charge the battery. Otherwise,
it may explode.
• Before performing the maintenance and inspection, be sure to
turn off the main power switch of the controller.
• When disposing of batteries, be sure to follow the user's
regulations.
• The user should NEVER replace or change parts other than
those stipulated in the instruction manual. Otherwise, the
performance will deteriorate, resulting in troubles.
• To replace parts, use the spare parts designated by Toshiba
Machine.
• Carry out the maintenance and inspection on a regular basis.
Otherwise, the equipment may go wrong or accidents will be
caused.
To perform the maintenance and inspection of the robot
with safety, read through and through the Maintenance
Manual provided separately before actually starting the
work.
To Next Page
Loading...
Need help?
General
