TL-SL3428 JetStream L2 Managed Switch CLI Guide
104
192.168.0.148 and name this file config.cfg:
TP-LINK# user-config load filename config.cfg ip-address 192.168.0.148
user-config save
Description
The user-config save command is used to save current settings.
Syntax
user-config save
Command Mode
Privileged EXEC Mode
Example
Save current settings:
TP-LINK# user-config save
firmware upgrade
Description
The firmware upgrade command is used to upgrade the switch system via the
TFTP server.
Syntax
firmware upgrade filename name ip-address ip-addr
Parameter
name —— Specify the name for the Firmware File.
ip-addr —— IP Address of the TFTP server.
Command Mode
Privileged EXEC Mode
Example
Upgrade the switch system via the TFTP server with the IP 192.168.0.148:
TP-LINK# firmware upgrade filename firmware.bin ip-address 192.168.0.148
To Next Page
Loading...
