TL-SL3428 JetStream L2 Managed Switch CLI Guide
188
cluster manage role-change
Description
The cluster manage role-change command is used to change the role of the
current switch. According to their status and functions, switches in the cluster
play different roles. You can specify the role the switch plays appropriate to your
needs. A commander switch can recognize and manage the devices in the
cluster; a member switch is managed by the commander; a candidate switch
does not belong to any cluster through it can be added to a cluster; an individual
switch is with the cluster feature disabled.
Syntax
cluster manage role-change { candidate | individual }
Parameter
candidate | individual —— The role you want the switch to play, with candidate
and individual options. The role of the switch you can change to is related with
the current role. The conversion among Candidate Switch and Individual Switch
is: Candidate Switch  Individual Switch.
Command Mode
Global Configuration Mode
Example
Change the role of the current switch to Candidate Switch:
TP-LINK(config)# cluster manage role-change candidate
show cluster ndp global
Description
The show cluster ndp global command is used to display the global
configuration of NDP.
Syntax
show cluster ndp global
Command Mode
Any Configuration Mode
Example
Display the global configuration of NDP:
TP-LINK> show cluster ndp global
To Next Page
Loading...
Need help?
General