TP-Link JetStream TL-SL3428 - Show Cluster Ndp Port-Status; Show Cluster Neighbour; Show Cluster Ntdp Global

TL-SL3428 JetStream L2 Managed Switch CLI Guide
189
show cluster ndp port-status
Description
The show cluster ndp port-status command is used to display NDP
configuration of the certain port.
Syntax
show cluster ndp port-status [port]
Parameter
port —— The port selected to display the configuration of NDP, ranging from 1
to 28. By default, the configuration of all ports is displayed.
Command Mode
Any Configuration Mode
Example
Display the NDP configuration of port 2:
TP-LINK> show cluster ndp port-status 2
show cluster neighbour
Description
The show cluster neighbour command is used to display the cluster neighbor
information.
Syntax
show cluster neighbour
Command Mode
Any Configuration Mode
Example
Display the cluster neighbor information:
TP-LINK> show cluster neighbour
show cluster ntdp global
Description
The show cluster ntdp global command is used to display the global
configuration of NTDP.