TP-Link JetStream TL-SL3428 - Show Snmp-Rmon History; Show Snmp-Rmon Event

TL-SL3428 JetStream L2 Managed Switch CLI Guide
183
Display the Notification table:
TP-LINK> show snmp destination-host
show snmp-rmon history
Description
The show snmp-rmon history command is used to display the configuration of
the history sample entry.
Syntax
show snmp-rmon history [index]
Parameter
index —— The index number of the entry selected to display the configuration,
ranging from 1 to 12. You can only select one entry for each command. By
default, the configuration of all entries is displayed.
Command Mode
Any Configuration Mode
Example
Display the configuration of all history sample entries:
TP-LINK> show snmp-rmon history
show snmp-rmon event
Description
The show snmp-rmon event command is used to display the configuration of
SNMP-RMON Event.
Syntax
show snmp-rmon event [index]
Parameter
index —— The index number of the entry selected to display the configuration,
ranging from 1 to 12. You can only select one entry for each command. By
default, the configuration of all entries is displayed.
Command Mode
Any Configuration Mode
Example