TL-SL3428 JetStream L2 Managed Switch CLI Guide
27
switchport voice-vlan mode
Description
The switchport voice-vlan mode command is used to configure the Voice
VLAN mode for the Ethernet port.
Syntax
switchport voice-vlan mode { manual | auto }
Parameter
manual / auto —— Port mode.
Command Mode
Interface Configuration Mode（interface ethernet / interface range ethernet）
Example
Configure Ethernet port 2 to operate in the manual voice VLAN mode:
TP-LINK(config)# interface ethernet 2
TP-LINK(config-if)# switchport voice-vlan mode manual
show voice-vlan global
Description
The show voice-vlan global command is used to display the global
configuration information of Voice VLAN.
Syntax
show voice-vlan global
Command Mode
Any Configuration Mode
Example
Display the configuration information of Voice VLAN globally:
TP-LINK(config)# show voice-vlan global
To Next Page
Loading...
