TP-Link JetStream TL-SL3428 - Chapter 12 SNMP (Simple Network Management Protocol)

TL-SL3428 JetStream L2 Managed Switch CLI Guide
162
IP-range will be processed. By default, the option is accept.
filter-addr-id —— The IP-range ID the port will be bound to, in the format of 1-3,
4, 6. Up to 15 IP-Ranges can be bound to one port.
max-group —— The maximum number of multicast groups for the port to join
in. It is used to prevent some ports taking up too much bandwidth.
Command Mode
Interface Configuration Mode（interface ethernet / interface range ethernet）
Example
Enable multicast filtering function for port 5, specify Action Mode as accept,
bound IP-range 2, 3, 4, and specify the maximum number of multicast groups
for port 5 to join in as 128:
TP-LINK(config)# interface ethernet 5
TP-LINK(config-if)# igmp-snooping filter status enable mode accept addr-id
2-4 maxgroup 128
show igmp-snooping global-config
Description
The show igmp-snooping global-config command is used to display the
global configuration of IGMP.
Syntax
show igmp-snooping global-config
Command Mode
Any Configuration Mode
Example
Display the global configuration of IGMP:
TP-LINK> show igmp-snooping global-config
show igmp-snooping port-config
Description
The show igmp-snooping port-config command is used to display the port
configuration of IGMP.
Syntax