TP-Link JetStream TL-SL3428 - Show Acl Bind

TL-SL3428 JetStream L2 Managed Switch CLI Guide
143
Syntax
show acl config acl-id
Parameter
acl-id —— The ID of the ACL selected to display the configuration.
Command Mode
Any Configuration Mode
Example
Display the configuration of the MAC ACL whose ID is 20:
TP-LINK> show acl config 20
show acl bind
Description
The show acl bind command is used to display the configuration of Policy bind.
Syntax
show acl bind
Command Mode
Any Configuration Mode
Example
Display the configuration of Policy bind:
TP-LINK> show acl bind