TP-Link JetStream TL-SL3428 - Chapter 3 IEEE 802.1 Q VLAN Commands; Vlan Database; Vlan

TL-SL3428 JetStream L2 Managed Switch CLI Guide
16
Chapter 3 IEEE 802.1Q VLAN Commands
VLAN (Virtual Local Area Network) technology is developed for the switch to divide the LAN into
multiple logical LANs flexibly. Hosts in the same VLAN can communicate with each other,
regardless of their physical locations. VLAN can enhance performance by conserving bandwidth,
and improve security by limiting traffic to specific domains.
vlan database
Description
The vlan database command is used to access VLAN Configuration Mode for
creating, deleting 802.1Q VLAN and other operations.
Syntax
vlan database
Command Mode
Global Configuration Mode
Example
Access VLAN Configuration Mode:
TP-LINK(config)# vlan database
TP-LINK(config-vlan)#
vlan
Description
The vlan command is used to create IEEE 802.1Q VLAN. To delete the IEEE
802.1Q VLAN, please use no vlan command.
Syntax
vlan VLAN_ID_LIST
no vlan VLAN_ID_LIST
Parameter
VLAN_ID_LIST ——The list of VLAN ID, in the format of 2-5,7, ranging from 2
to 4094.
Command Mode
VLAN Configuration Mode