TP-Link JetStream TL-SL3428 Cli Reference Guide

TL-SL3428 JetStream L2 Managed Switch CLI Guide
190
Syntax
show cluster ntdp global
Command Mode
Any Configuration Mode
Example
Display the global configuration of NTDP:
TP-LINK> show cluster ntdp global
show cluster ntdp port-status
Description
The show cluster ntdp port-status command is used to display NTDP
configuration of the certain port.
Syntax
show cluster ntdp port-status [port]
Parameter
port —— The port selected to display the configuration of NTDP, ranging from
1 to 28. By default, the configuration of all ports is displayed.
Command Mode
Any Configuration Mode
Example
Display the NTDP configuration of port 2:
TP-LINK> show cluster ntdp port-status 2
show cluster ntdp device
Description
The show cluster ntdp device command is used to display the device table of
NTDP.
Syntax
show cluster ntdp device
Command Mode
Any Configuration Mode
Example

TP-Link JetStream TL-SL3428 Specifications

General

Brand	TP-Link
Model	JetStream TL-SL3428
Category	Switch
Language	English