TP-Link JetStream TL-SL3428 - Port Rate-Limit Disable Egress; Show Interface Configuration

TL-SL3428 JetStream L2 Managed Switch CLI Guide
115
ingress-rate limit.
Syntax
port rate-limit disable ingress
Command Mode
Interface Configuration Mode（interface ethernet / interface range ethernet）
Example
Disable the ingress-rate limit for port5:
TP-LINK(config)# interface ethernet 5
TP-LINK(config-if)# port rate-limit disable ingress
port rate-limit disable egress
Description
The port rate-limit disable egress command is used to disable the egress-rate
limit.
Syntax
port rate-limit disable egress
Command Mode
Interface Configuration Mode（interface ethernet / interface range ethernet）
Example
Disable the egress-rate limit for port5:
TP-LINK(config)# interface ethernet 5
TP-LINK(config-if)# port rate-limit disable egress
show interface configuration
Description
The show interface configuration command is used to display the
configurations of an Ethernet port, including Port-status, Bandwidth Control,
Negotiation Mode and Port-description.
Syntax
show interface configuration {ethernet [interface]}
Parameter
interface —— The port selected to display the configurations. By default, the