TP-Link JetStream TL-SL3428 Cli Reference Guide

TL-SL3428 JetStream L2 Managed Switch CLI Guide
50
binding-table remove
Description
The binding-table remove command is used to delete the IP-MAC –VID-PORT
entry from the binding table.
Syntax
binding-table remove index idx
Parameter
idx —— The entry number needed to be deleted. You can use the show
binding-table command to get the idx. Pay attention to that, the entry number is
the actual number in the binding table not arranged in an order.
Command Mode
Global Configuration Mode
Example
Delete the IP-MAC –VID-PORT entry with the index 5:
TP-LINK(config)# binding-table remove index 5
dhcp-snooping
Description
The dhcp-snooping command is used to enable the DHCP-snooping function
for the switch. To disable the DHCP-snooping function, please use no
dhcp-snooping command. DHCP Snooping functions to monitor the process of
the Host obtaining the IP address from DHCP server, and record the IP address,
MAC address, VLAN and the connected Port number of the Host for automatic
binding.
Syntax
dhcp-snooping
no dhcp-snooping
Command Mode
Global Configuration Mode
Example

TP-Link JetStream TL-SL3428 Specifications

General

Brand	TP-Link
Model	JetStream TL-SL3428
Category	Switch
Language	English