TP-Link JetStream TL-SL3428 Cli Reference Guide

TL-SL3428 JetStream L2 Managed Switch CLI Guide
78
Global Configuration Mode
Example
Configure the maximum time for the switch to wait for the response from the
RADIUS authentication and the accounting server as 5 seconds:
TP-LINK(config)# radius response-timeout 5
show dot1x global
Description
The show dot1x global command is used to display the global configuration of
801.X.
Syntax
show dot1x global
Command Mode
Any configuration Mode
Example
Display the configuration of 801.X globally:
TP-LINK(config)# show dot1x global
show dot1x interface
Description
The show dot1x interface command is used to display the port configuration of
801.X.
Syntax
show dot1x interface [ ethernet port-num ]
Parameter
port-num ——The number of the Ethernet port, ranging from 1 to 28. Display the
configuration of all the ports ,by default.
Command Mode
Any configuration Mode

TP-Link JetStream TL-SL3428 Specifications

General

Brand	TP-Link
Model	JetStream TL-SL3428
Category	Switch
Language	English