Tracker Off-Road 500S - Hood;Front Storage Compartment; Front Body Panel

30
PK140A
PK139A
PK138A
3. Secure and install the lower fascia to the frame using
the cap screws.
PK137A
PK136A
4. Check and adjust headlight aim (see Headlight —
Taillight/ Brake Light — Reverse Light section).
Hood/Front Storage
Compartment
To access the front storage compartment, lift up firmly on
the front of the hood to remove. To install, align the tabs
of the hood into the front panel slots and press down
firmly to secure.
PK084
Front Body Panel
REMOVING
1. Remove the front fascia (see Front Fascia/Front
Bumper section); then remove both side panel
assemblies (see Dashboard — step 5).
2. With assistance remove the cap screws and nuts
securing the front half of the ROPS assembly; then
remove. Discard the cap screws and nuts.