82
FI669
5. Remove the circlip securing the high driven gear;
then remove a washer, the high driven gear along
with the bearing and bushing, and remove the high
driven washer.
FI670
FI671
ASSEMBLING
1. With the high driven washer (1) on the countershaft,
install the high driven gear bushing (3), bearings (2),
and gear (4) on the countershaft; then install the
washers (5) and secure with the snap-ring.
FI671A
FI670
2. Install the high/low shift dog (6) on the countershaft
and secure with snap-ring (7); then install the splined
washer (8).
FI668A
3. Install the low driven bushing (10), bearing (9), and
gear (11) on the countershaft; then install splined
washer (12).
FI667A
To Next Page
Loading...
