30 RT-SVP011E-EN
TD7 Display
Cooling
Touch the Cooling button to view Cooling, Circuit 1 and Circuit 2 level status information in the table
below.
The data presented in this table i
s uni
t configuration dependent.
Relief Fan Proving
Return Fan Run Command
Return Fan Speed Status
Return Fan Speed Command
Return Fan Proving
Relief Air Damper Command
Relief Air Damper Position
Space Static Pressure Active
Space Static Pressure Setpoint Active
Outdoor Air Flow Active
Outdoor Air Min Flow Setpoint Status
Outdoor Air Flow 1
Outdoor Air Flow 2
Discharge Air Iso Damper Command
Return Air Iso Damper Command
Return Air Iso Damper Command Pct
Space CO2 Concentration Active
Minimum Ventilation Status
Pre Evap Filter Differential Pressure
Final Filter Differential Pressure
VOM A Input
VOM B Input
VOM C Input
VOM D Input
VOM E Input
VOM Relay Status
Table 2. Ventilation status (continued)
Ventilation
Table 3. Cooling, Circuit 1 and Circuit 2 level status
Cooling Cooling - Circuit 1 Cooling - Circuit 2
Cooling Capacity Status Compressor 1A Status Compressor 2A Status
Space Temp Cooling Setpoint Status Compressor 1B Status Compressor 2B Status
Discharge Air Temperature Active Compressor 1C Status Compressor 2C Status
Discharge Air Cooling Setpoint Status Compressor VFD RPM Cprsr1A Suction Pressure Ckt2
Space Temperature Active Suction Pressure Ckt1 Suction Saturated Temperature Ckt2
Occupied Cooling Setpoint Active Suction Saturated Temperature Ckt1 Suction Temperature Evap2A
Unoccupied Cooling Setpoint Suction Temperature Evap1A Discharge Pressure Ckt2
To Next Page
Loading...
