8 RT-SVP011E-EN
Overview
The purpose of this guide is to assist you in installing, programming, and operating the equipment
with the TD7 display and the Symbio™ UI. This guide describes how to access the screens and the
types of information that appear on the screens.
The TD7 display is mounted to the unit and allows you to view
data, make operational changes,
and m
anually control the equipment.
Symbio™ UI is a built in service tool that allows users to set up, operate, and troubleshoot the
equipment.
Hardware
The TD7 display is a durable factory-mounted touch screen display that is designed to operate in
both indoor or outdoor environments.
Communication
An factory provided Ethernet cable provides communication between the TD7 display and the unit
controller.
Screen Characteristics
The 7-inch WVGA 800 x 480 resolution touch-sensitive color screen is backlit, which enables
viewing in poor light conditions including outdoor usage (with the exception of direct sunlight).
Touchscreen Guidelines
The touch screen registers the downward pressure of a touch. Light, quick, yet deliberate touches
are most effective. Touching with more pressure has no effect.
Recommended tools to use:
•Finger
•Thumb
• Pencil eraser
Do not use:
• A screwdriver
•A pen
• A pencil point
• Any other sharp or pointed object that might
scratch the screen surface
To Next Page
Loading...
