54
PKG-SVX027D-EN
Controls
Unit Controller
The MSC uses the UC600 control platform for monitoring
and control. XM expansion modules are used to expand
the UC600's I/O capabilities.
In the control panel, the following modules are used:
• UC600
• TD-7 touch screen display and user interface
• XM70.1
• XM32.2
• XM32.3
• XM32.12
• XM32.4 (70-80 ton units only)
• XM30.5 (70-80 ton units only)
• XM30.6 (70-80 ton units only)
• XM32.13-GBAS option
• XM30.14-GBAS option
• XM30.15-GBAS option
Note: The number after the dot in the name (example:
XM30.#) is the IMC bus address, which is set using
the rotary switches on the module.
Remotely mounted in the compressor cassettes, the
following modules are used:
• XM30.7-Entering/Leaving Condenser water
temperature sensors, condenser water strainer in/out
water pressure sensors
• XM30.8-Compressor A: discharge/suction pressure
sensors, suction temperature, and WRV position
control
• XM30.9-Compressor B: discharge/suction pressure
sensors, suction temperature, and WRV position
control
• XM30.10-Compressor C: discharge/suction pressure
sensors, suction temperature, and WRV position
control
• XM30.11-Compressor D: discharge/suction pressure
sensors, suction temperature, and WRV position
control
To Next Page
Loading...
Need help?
General
