Programming Codes iTherm
®
280 Programmer’s Guide
28-04430 Rev K Page 153
Carbon Copy Journal Mode
Carbon copy mode allows information sent to the receipt or validation station to be
copied into the electronic journal. An electronic journal entry is started with a ―Start
Carbon Copy‖ mode command and continues until a station select command is received
or a ―Stop Carbon Copy‖ command is received. The carbon copy operation may be
suspended and restarted by a ―Carbon Copy Suspend‖ and ―Carbon Copy Resume‖
command. (Note: ―Carbon Copy Suspend‖ and ―Carbon Copy Resume‖ commands do
not generate new electronic journal records.)
Function Electronic Carbon Copy Begin
ASCII [ESC]l <3>
Hexadecimal 1BH 6CH<3>
Decimal <27> <108><3>
IPCL &%EB
EPOS
Description This command begins a carbon copy journal entry.
Function Electronic Carbon Copy Suspend
ASCII [ESC]l <2>
Hexadecimal 1BH 6CH<2>
Decimal <27><108><2>
IPCL &%ES
EPOS
Description This command temporarily suspends carbon copy journal entry.
Function Electronic Carbon Copy Resume
ASCII [ESC]l <1>
Hexadecimal 1BH 6CH<1>
Decimal <27><108><1>
IPCL &%ER
EPOS
Description This command resumes a temporarily suspended carbon copy journal
entry.
Function Electronic Carbon Copy End
ASCII [ESC]l <0>
Hexadecimal 1BH 6CH<0>
Decimal <27> <108><0>
IPCL &%EE
EPOS
Description This command ends a carbon copy journal entry.
To Next Page
Loading...
