TransAct Ithaca 280 - Page 189

Programming Codes iTherm
®
280 Programmer’s Guide
28-04430 Rev K Page 177
[ENQ] <23> Inquire user-store status
ASCII [ENQ] <23>
Hexadecimal 05H 17H
Decimal <5> <23>
Function The [ENQ] <23> command reports on the user-store status.
Response [ACK] <23> <Report> <0>
Where <23> is the echo of command ID. The report is a null terminated string with the
following format:
12345[CR][LF] (Free user store)
12345 Type Name…[CR][LF] (First entry) etc.
12345 Type Name…[CR][LF] (Last entry) <0>
Type The type field describes the type of information.
M = macro
C = character definition
[ENQ] <24> Inquire Color status
ASCII [ENQ] <24>
Hexadecimal 05H 18H
Decimal <5> <24>
Function The [ENQ] <24> command reports Color Cartridge status.
Response [ACK] <24> <Length+40><n
1
><n
2
><n
3
>
Where <24> Is the echo of command
<n
1
> Secondary Pen Color 0 = Not installed, 1 = Red, 2 = Green, 4 = Blue
<n
2
> Primary Pen Color 1 = Red, 2 = Green, 4 = Blue 16 = Black
<n
3
> Pen Status
bit 0 = Not defined
bit 1 = Not defined
bit 2 = Secondary Cartridge not installed
bit 3 = Primary Cartridge not installed
bit 4 = Secondary Cartridge low on ink.
bit 5 = Primary Cartridge low on ink.
bit 6 = 1 always
bit 7 = 0 always
[ESC] [EM]P<n> Activate Periodic Status Back
ASCII [ESC] [EM] P<n>
Hexadecimal 1BH 19H 50H <n>
Decimal <27> <25> <80><n>
IPCL None
EPOS None
Description This command activates the periodic status back feature. It will
automatically return an [ENQ]<20> status (See page Error! Bookmark