Table 37 MPRX Commands Listed Numerically
Number Command Name Reader Message
488 Disable eATA
#Done if MPRX model
supports this tag protocol
#Error if tag protocol is
unsupported
489 Enable eATA
#Done if MPRX model
supports this tag protocol
#Error if tag protocol is
unsupported
505 Display software version
Model [model]
Ver [version no.]
SN [serial no.]
506 Display hardware configuration information
S...S (Max 20 characters)
520 Display power fail bit
PWRB P<0 to 1> R0
521 Display reader ID number
RDID xx
522 Display comm port parameters
MAIN B<2 to 7> S<0
to 1> P<0 to 2> D0
524 Display appended info status
IDAP T<0 to 1> D<0
to 1> X<0 to 1>
525 Display comm protocol
ECPS P<0 to 2>
T<01 to FF> X<0 to
2> S0
527 Display RF status
RFST C<0 to 1> O<0
to 1> T<1 to 3>
Fxxx Rxx Gxx Axx
Ixx
529 Display presence input status
PRST P<0 to 1> D0
A<0 to 2> T<0 to
F> I<0 to 1>
530 Display RF0 filter status
RF0S U<0 to 4> V<0
to 3>
534 Display tag translation mode status
TT <0 to 1>
537 Display echo status
ECHO <0 to 1>
540 Display flash checksum
PCKS I0000 Exxxx
MPRX User Guide
TransCore Proprietary
D–120
D–120
To Next Page
Loading...
