Operation
Commissioning and start-up after service and maintenance work
49
Check direction of
rotation
Risk of injury due to exposed machine parts!
Rotating machine parts may retract parts of the body, hair and clothes and
cause crushing.
Wear close-fitting protective clothing.
Use a hairnet for long hair.
Do not reach into machine when in operation.
Do not access the machine.
Ask a second person to supervise.
Complete the following steps:
1. Switch the machine on briefly.
2. Check for correct direction of rotation.
3. Switch the machine off.
The direction of rotation has been checked. The machine is running.
Carry out a test run
Risk of injury due to exposed machine parts!
Rotating machine parts may retract parts of the body, hair and clothes and
cause crushing.
Wear close-fitting protective clothing.
Use a hairnet for long hair.
Do not reach into machine when in operation.
Do not access the machine.
Ask a second person to supervise.
Complete the following steps:
1. Remove all foreign objects from the working area of the machine.
2. Switch on the machine.
3. Check it is running smoothly.
? Noise output
If excessive noise occurs:
Locate source and eliminate fault, please refer to "Troubleshooting".
To Next Page
Loading...
